1) PLACE FLAT PORTION OF FOOTREST (PICTURED FIRST) ON THE BOTTOM OF THE FRONT FEET OF YOUR CHAIR. MAKE SURE THEY ARE PERFECTLY SQUARE WITH EACH FOOT.

2) ALIGN THE HOLES FROM FLAT PARTS WITH THE FRONT FEET OF THE CHAIR.

3) PLACE THE SCREWS UP FROM THE BOTTOM AND THE WASHER AND NUT ON THE TOP / WHERE THE SCREW POKES THROUGH THE TOP OF THE FOOT HOLE.

4) USE A SCREWDRIVER AND A SOCKET OR WRENCH TO HAND TIGHTEN THE SCREW.

5) FOLD THE FOOT PIECE OF THE FOOTREST (PICTURED FIRST) UNDER THE FRONT PART OF THE CHAIR SEAT ITSELF. THIS WILL ALLOW THE FOOTREST TO FALL BEHIND THE “X” MEMBER OF THE CHAIR, COMPLETELY BEING HIDDEN AWAY.(PICTURED THIRD)

6) PUT CANOPY BACK BEHIND THE CHAIR AND LAY THE CHAIR ON ITS BACK.

7) FINISH TIGHTENING THE SCREW AND NUT COMPLETELY.

8) NOW YOU CAN LEAVE THE FOOTREST ON FOR GOOD ONLY USING IT WHEN YOU DESIRE BY FOLDING THE FOOTREST OUT FROM UNDER THE SEAT AND BEHIND THE X FRAME.

9) WHEN READY TO LEAVE FOR THE DAY, FOLD THE FOOTREST BACK UNDER THE SEAT AND BEHIND THE X FRAME AND FOLD CHAIR UP INSIDE THE BACKPACK (PICTURED FOURTH)